Canon Printer MP145 MP160 MP198 E2E3E4E5E8E15E16E27E29E42
Dizzy when work piled printer canon MP145, MP160, mp198 etc. have you actually crashed. Relax, the problems often face is like the following error code;
E2 = NO PAPER
E3 = PAPER JAM
E4 = NO INK
E5 = CATRIDGE NOT INSTALLED
E8 = WASTE INK ABSORBER FULL
E15= CATRIDGE NOT INSTALLED
E27= WASTE INK ABSORBER FULL
E29= EEPROM ERROR
E42= SCANNER ERROR
Here I'll review a bit about how to deal with it;
These tips for a printer canon MP alone.
E3 = PAPER JAM; usually means the printer if the pump does not quite fit the paper sensor / could also die. Really easy to replace only armed with solder.
E5/E7 = catridge NOT INSTALLED; one canon cartridge you die. Kalo is so way out just to replace it.
WASTE INK ABSORBER E8/E27 = FULL; if this problem is easy, he just asked for the research. Because it was from his canon if some 10,000 sheets should be at zero again. For his research bebrapa MP printar not need to use the software, to how tough on other pages. If printer canon IP1200, IP1300, IP1600, IP1700, iP1880, iP1980, IP2770 its research should use sofware.bisa also in research by the manual, but after the printer will turn off again.
How to reset canon printer manuals;
- Plug the power cord
- Hold down the reset button
- Then press the power button
- Then press the reset button (the button under the power button) 2x.
- And release the same time, the guarantee can be made printer again.